| |
NetKey™
a cost-effective access control system based
on TINI® server from Dallas Semiconductor. One NetKey is
controling the access to one public door of the building and the garage
Each door is
equiped with a
NetKeyserver™, a iButton reader
and a electronic door strikes, sized to
fit in a commercial door jam.
When an iButton is pressed to
the Blue Dot receptor at the door entrance, TINI reads its 64-bit 1-Wire
address and compares to a local list of valid buttons. If there is a match,
TINI activates the electronic door strike over the 1-Wire net..
Empirical results indicate that less
than 100 ms are required to detect the iButton and open the lock.
Response time is directly proportional to the number of locks monitored by
the TINI module and the number of processes active.
Key Benefits
- an uniquely net-centric solution build around the
powerful TINI™ platform and iButtons (keys) from Dallas Semiconductor
- iButtons provide the user the convenience of a "Touch and Go" entry,
while TINI provides Internet connectivity for administration and key management.
- cost effective and easy to operate
| Description |
NT |
Nos |
Price_€
|
| NetKeyserver |
|
1 |
450 |
| Elektronicmodul |
5061 |
1 |
75 |
| iButton reader |
|
1 |
45 |
| ibutton key |
|
1 |
5 |
| Keylock |
|
1 |
55 |
| Door LED blinking |
Door lock is operational and is
waiting for valid iButton. |
| Door LED ON |
If a valid iButton is detected,
access is granted and the door LED will stay ON for DOOR_OPEN_MILLIS
millisecond. |
| Door LED OFF |
Either the lock is disabled or invalid
iButton is detected. In the case where an invalid iButton
is detected, access is denied and the LED will stay OFF. The door will
resume operation after DOOR_DISABLE_MILLIS millisecond. |
| Log In |
Administrator log in page. ALL
administrative functions require log in to verify authorized access.
|
| Log Out |
Log out page. Terminate administrative
rights for this log in session. |
| Start Circuit |
Start lock circuits. Log in required. |
| Stop Circuit |
Stop all active lock circuits. Log in
required. |
| Open Door |
Open door from a remote host. A list
of available door circuits are displayed and the user can select from
the list. Log in required. |
| Add User |
Add in authorized user. Administrator
needs to supply user name and a valid iButton serial number. Log
in required. |
| Remove User |
Remove user access. Administrator
needs to supply a valid iButton serial number. Log in required. |
| Display All Users |
Display all authorized users. Log in
required. |
| Change Password |
Change administrator password.
Administrator needs to supply "User Name", "Old Password", "New
Password" and "Confirm New Password". Log in required. |
| Commit Changes |
Commit changes to memory. Any changes
not committed will be lost on next TiniHttpServer launches. Log in
required. |
|
BFM AB